The installation steps for TV bracket are as follows:
Preparation stage
Tool preparation: Prepare tools such as drill, screwdriver, wrench, level, tape measure, etc.
Material confirmation: Check if the TV bracket and its matching expansion screws, washers, screws, and other accessories are complete, and if the model is compatible with the TV and wall.
Location planning: Based on the viewing distance and height, mark the installation position on the wall with a tape measure and a level. Generally, the TV center is 1.2-1.5 meters above the ground, which is more suitable to ensure a horizontal position.
Wall fixing
Drilling operation: Use a drill bit to drill holes according to the markings. The depth and diameter of the hole depend on the specifications of the expansion screw, and the hole depth is usually 2-3 millimeters longer than the screw.
Screw installation: Tap or screw the expansion screw into the hole to firmly fix it to the wall.
Bracket fixation: Align the fixed part of the TV bracket with the expansion screw, tighten the screw with a screwdriver or wrench, and check with a level during the process to ensure that the fixed part is in a horizontal state.
TV connection
Backboard installation: If the bracket has a backboard, fix it to the TV with appropriate screws according to the holes on the back of the TV, ensuring that the screws are tightened.
Overall connection: Align the back panel of the TV with the fixed part of the bracket on the wall, connect and tighten it with a slot or screw, and hold the TV firmly to prevent it from falling off during operation.
Debugging and inspection
Angle adjustment: According to viewing needs, use the bracket adjustment function to adjust the pitch and left and right angles of the TV to achieve the best viewing effect.
Stability check: Gently shake the TV and check if the connection between the bracket and the wall, as well as between the TV and the bracket, is stable. Confirm that all screws are not loose.
Cable organization: Use cable ties or cable trays to organize the power and signal cables of the TV to avoid clutter.
